Orivon Frost Cold Plunge Tub with Integrated Chiller

1-Person Acrylic Hot and Cold Immersion Tub with 1HP Temperature-Control System

Create a modern at-home immersion experience with the Orivon Frost Cold Plunge Tub. Designed with a sleek rectangular profile and premium acrylic construction, the Frost combines contemporary styling with an integrated temperature-control system for convenient hot or cold water immersion.

The built-in 1HP chiller and heating system maintains adjustable water temperatures from approximately 37°F to 108°F. This wide temperature range allows you to personalize each session for cold plunging, cool-water immersion, or heated soaking without the need for a separate external chiller.

Available in white, black, and brown, the Orivon Frost is designed for home gyms, residential wellness rooms, villas, sports facilities, and suitable outdoor spaces. Its freestanding, plug-and-play configuration offers a straightforward setup while maintaining a clean and modern appearance.

Who This Is For

• Homeowners creating a dedicated wellness or recovery space
• Fitness enthusiasts adding cold-water immersion to their routine
• Sauna owners building a hot and cold contrast therapy setup
• Customers seeking an all-in-one tub with an integrated chiller
• Anyone who prefers a modern acrylic design over a traditional wood tub

Why Choose the Orivon Frost?

• Integrated 1HP system cools or heats the water
• Wide temperature range supports cold, cool, and warm immersion
• Plug-and-play configuration simplifies initial setup
• Premium acrylic construction provides a smooth, easy-to-clean surface
• Freestanding design works in a variety of residential wellness spaces
• Three finish options make it easier to coordinate with your space
• Backed by a free 1-year manufacturer warranty

Key Features

• 1-person hot and cold immersion tub
• Built-in 1HP integrated chiller and heating system
• Adjustable temperature range from 37°F to 108°F
• Integrated thermostat for precise temperature control
• Premium acrylic construction
• Glossy, modern exterior finish
• Available in white, black, and brown
• Two integrated water jets
• Freestanding rectangular design
• Plug-and-play configuration
• Center or left-side drainage configuration
• Suitable for properly prepared indoor or outdoor installations
• Designed for straightforward maintenance and operation

Popular Uses

• Cold-water immersion after exercise
• Cool-down sessions after sauna use
• Hot and cold contrast therapy routines
• Home gym and residential wellness spaces
• Relaxing warm-water immersion

Available Color Options

• Glossy White
• Black
• Brown

Color appearance may vary slightly depending on lighting, display settings, and production materials. Please select your preferred finish before adding the tub to your cart.

Orivon Frost Specifications

• Capacity: 1 person
• Product Type: Hot and cold immersion tub
• Installation Type: Freestanding
• Temperature-Control System: Integrated 1HP chiller and heater
• Temperature Range: 37°F–108°F / 3°C–42°C
• Dimensions: 77"L x 32"W x 28"H
• Product Weight: 475 lbs
• Material: Premium acrylic
• Finish: Glossy
• Jets: 2
• Current: 12A
• North American Electrical Configuration: 110V / 60Hz
• Alternative Electrical Configuration: 220V / 50Hz
• Drain Location: Center or left-side drainage
• Configuration: Plug-and-play
• Available Finishes: White, black, and brown

What's Included

• Orivon Frost hot and cold immersion tub
• Integrated 1HP chiller and heating system
• Integrated thermostat and temperature-control system
• Two water jets
• Drainage system
• Required internal water connections
• Power connection
• Installation and operation instructions
• Free 1-year manufacturer warranty

Required Components and Site Preparation

The following items or services may be required depending on the installation location and are not included unless specifically stated:

• Stable, level, and load-bearing foundation
• Properly grounded electrical outlet matching the ordered configuration
• GFCI-protected electrical connection where required by local code
• Suitable water source for filling the tub
• Approved drainage location or drainage connection
• Weather protection for outdoor installations where required
• Licensed electrician or qualified installer when required by local code

Shipping & Delivery

Free freight shipping is included for eligible deliveries within the contiguous United States.

Due to the size and weight of the Orivon Frost, the tub ships by freight carrier and requires scheduled delivery by appointment. The customer must be available to inspect and receive the shipment.

Freight delivery is generally limited to curbside or driveway delivery. The driver is not responsible for moving the tub into a home, backyard, wellness room, or installation area. The customer is responsible for arranging the equipment and assistance needed to move the tub safely from the delivery point.

Before delivery, confirm that your property has adequate access for a freight truck and that you have a plan for moving the 475 lb tub to its final location.

Special delivery requirements, restricted access, re-delivery, storage, address corrections, or additional carrier services may result in added charges.

Installation Notes

• Install the tub on a stable, level, and load-bearing surface
• Confirm that the installation surface can support the tub, water, and user
• Verify the ordered voltage configuration before connecting power
• Use a properly grounded and code-compliant electrical connection
• Do not use extension cords or power adapters unless approved by the manufacturer
• Maintain adequate clearance around the tub for ventilation and service access
• Provide an appropriate drainage location for water changes and maintenance
• Outdoor installations should be protected from severe weather and environmental exposure
• Follow all manufacturer instructions and local electrical, plumbing, and building codes
• Professional installation is recommended when required by the site conditions or local regulations

Care & Maintenance

• Maintain the water according to the manufacturer's sanitation and care instructions
• Clean the acrylic surface using non-abrasive products approved for acrylic
• Do not use harsh chemicals, abrasive brushes, or scouring pads
• Inspect the drain, jets, connections, and temperature-control system regularly
• Keep ventilation openings clear of debris and obstructions
• Drain or winterize the tub when required by climate and manufacturer instructions
• Disconnect power before performing maintenance unless instructed otherwise

Warranty

The Orivon Frost includes a free 1-year manufacturer warranty. Warranty service is subject to the manufacturer's terms, proper use, correct installation, and compliance with the product's care and operating instructions.

What the Warranty Does Not Cover

The Orivon Wellness warranty excludes:

• Normal wear
• Improper installation
• Misuse, abuse, or neglect
• Unauthorized repairs or modifications
• Commercial use unless commercial coverage is specifically stated
• Damage caused by weather, fire, pests, or other external factors

Complete warranty coverage and exclusions are determined by the official Orivon warranty terms in effect at the time of purchase.

How to Submit a Warranty Claim

To request warranty assistance, contact Prime Regeneration and provide:

• Your full name
• Prime Regeneration order number
• A description of the issue
• Clear photos or videos showing the affected area

After the claim is reviewed, the available resolution may include troubleshooting assistance, repair, replacement parts, or a full product replacement, depending on the nature of the issue and the applicable warranty terms.

Complete Your Wellness Setup

Pair the Orivon Frost with a sauna to create a complete hot and cold contrast therapy space at home.

• Shop Cold Plunges
• Explore Contrast Therapy
• Browse Traditional Saunas
• Explore Infrared Saunas
• Shop Outdoor Saunas

Frequently Asked Questions

Does the Orivon Frost include a chiller?
Yes. The Frost includes an integrated 1HP chiller and temperature-control system, so a separate external cooling unit is not required.

Can the Orivon Frost heat the water?
Yes. The integrated 1HP temperature-control system cools or heats the water from approximately 37°F to 108°F, allowing the Frost to be used for cold plunging, cool-water immersion, or heated soaking. Actual heating and cooling times may vary based on the starting water temperature, ambient conditions, and installation location.

How many people can use the tub?
The Orivon Frost is designed for one person at a time.

What colors are available?
The Frost is available in white, black, and brown.

Is the tub suitable for outdoor use?
Yes. The tub may be installed outdoors when placed on a suitable foundation and protected according to the manufacturer's instructions. Local climate, freezing temperatures, direct weather exposure, electrical safety, and drainage should be considered before installation.

Does the tub require special electrical service?
The North American configuration is listed as 110V / 60Hz and 12A. An alternative 220V / 50Hz configuration is also available. Confirm the voltage of the unit being ordered before installation.

Is professional installation required?
The Frost is designed for straightforward, plug-and-play setup. However, professional assistance may be needed to move the 475 lb tub, prepare the installation surface, verify electrical requirements, or comply with local codes.

Does the tub ship free?
Yes. Free freight shipping is included for eligible deliveries within the contiguous United States. Additional services or special delivery conditions may result in added carrier charges.

What does the 1-year warranty cover?
Warranty coverage is based on the manufacturer's official terms and may provide repair, replacement parts, or full product replacement for eligible claims. Normal wear, improper installation, misuse, unauthorized repairs, unapproved commercial use, and damage from outside factors are excluded.