Nicebeam LED Red Light Therapy Face Mask | 4-Wavelength + Laser

Four-Wavelength LED and Laser Light Therapy for At-Home Facial Care

The Nicebeam LED Red Light Therapy Face Mask combines four targeted wavelengths in a flexible, cordless design created for convenient at-home skincare. The mask uses 415nm blue light, 630nm red light, 850nm near-infrared light, and a manufacturer-listed 1072nm laser wavelength.

With 279 total light elements, three adjustable brightness levels, a 10Hz pulse option, and pre-set 10-minute sessions, the Nicebeam face mask provides a structured way to incorporate multi-wavelength light into a regular cosmetic skincare routine.

The flexible medical-grade liquid silicone construction is designed to conform to the contours of the face while the built-in 4000mAh rechargeable battery allows cordless operation. Choose between two manufacturer-programmed wavelength combinations depending on your skincare routine.

Individual cosmetic results vary. No specific cosmetic outcome is guaranteed.

Who This LED Face Mask Is For

The Nicebeam LED Red Light Therapy Face Mask may be suitable for adults seeking:

• A multi-wavelength LED face mask for at-home skincare
• Red and near-infrared light for a cosmetic anti-aging routine
• A blue-light option as part of a blemish-prone skincare routine
• A flexible silicone mask instead of a rigid plastic design
• A cordless light therapy mask with a built-in rechargeable battery
• Short, pre-set 10-minute skincare sessions
• Adjustable brightness and pulse settings
• A portable facial light device that can be stored or packed for travel

Why Choose the Nicebeam LED Red Light Therapy Face Mask?

Many at-home red light face masks use only red and near-infrared wavelengths. The Nicebeam mask expands the available spectrum by combining four manufacturer-listed wavelengths:

• 415nm Blue Light
• 630nm Red Light
• 850nm Near-Infrared Light
• 1072nm Laser Light

The device uses different wavelength combinations depending on the selected mode, allowing one mask to support more than one type of cosmetic skincare routine.

Its flexible silicone construction sits closer to the contours of the face than many rigid masks, while the integrated battery eliminates the need to remain connected to a wall outlet during use.

Each session is pre-set to approximately 10 minutes, making the device easy to incorporate into a morning or evening routine without manually timing each session.

Key Features

• Four-Wavelength Technology: Combines 415nm, 630nm, 850nm, and manufacturer-listed 1072nm laser light.
• LED + Laser Design: Combines broad LED illumination with an additional manufacturer-listed laser wavelength.
• 279 Total Light Elements: Designed to provide distributed coverage across the face.
• Two Pre-Set Modes: Different wavelength combinations support different cosmetic skincare routines.
• 10-Minute Sessions: Automatic pre-set session length simplifies regular use.
• Three Brightness Levels: Choose 50%, 75%, or 100% intensity.
• 10Hz Pulse Mode: Optional pulsed-light setting provides another way to personalize sessions.
• 35–45 mW/cm² Listed Irradiance: Manufacturer-listed light intensity for the device.
• 4000mAh Rechargeable Battery: Allows cordless operation between charges.
• Flexible Silicone Construction: Designed to conform more closely to facial contours.
• Hands-Free Use: Adjustable straps hold the mask in place during a session.
• Portable Design: Includes a storage bag for organization and travel.

Understanding the Four Wavelengths

415nm Blue Light

415nm falls within the visible blue-light spectrum. Nicebeam incorporates this wavelength into one of the mask’s programmed modes for cosmetic care of blemish-prone skin.

Blue light is not appropriate for every person or every skin concern. People with a history of hyperpigmentation, photosensitivity, melasma, or sensitivity to visible blue light should consult a qualified dermatologist before using this setting.

630nm Red Light

630nm visible red light is commonly incorporated into cosmetic skincare routines focused on the appearance of smoother, firmer, and more even-looking skin.

850nm Near-Infrared Light

850nm near-infrared light is largely outside the visible range of the human eye. The corresponding emitters may appear dim or may not look illuminated even while operating normally.

1072nm Laser Light

The manufacturer lists a 1072nm laser wavelength as part of both programmed modes. Because this wavelength is outside the visible range, it should not be expected to appear as a bright visible light.

The current Nicebeam product page does not clearly publish the laser class, individual laser output, or complete beam specifications. Use the device only according to the supplied manufacturer instructions and do not stare directly into any illuminated or laser emitter.

Two Pre-Set Light Modes

Red + Near-Infrared + 1072nm Mode

This mode combines:

• 630nm red light
• 850nm near-infrared light
• 1072nm manufacturer-listed laser light

Nicebeam identifies this combination as its Anti-Blemish Mode. Prime Regeneration presents it as a cosmetic light-care option for blemish-prone skin and does not represent the device as a substitute for professional skin evaluation or treatment.

Blue + Near-Infrared + 1072nm Mode

This mode combines:

• 415nm blue light
• 850nm near-infrared light
• 1072nm manufacturer-listed laser light

Nicebeam identifies this combination as its Anti-Acne Mode. Prime Regeneration presents it as a cosmetic light-care option for blemish-prone skin and does not represent the device as a substitute for professional acne evaluation or treatment.

Brightness and Pulse Settings

The included controls allow users to select from three brightness levels:

• 50% — lower-intensity setting suitable for beginning users
• 75% — intermediate brightness
• 100% — maximum manufacturer-provided brightness

The device also includes an optional 10Hz pulse setting. Begin conservatively if you are new to light-based facial devices and follow the manufacturer’s instructions when increasing brightness or using pulsed operation.

Product Specifications

Brand	Nicebeam
Product Type	Flexible LED and laser light therapy face mask
Product Name	Nicebeam LED Red Light Therapy Face Mask
Material	Medical-grade liquid silicone
Light Technology	LED + manufacturer-listed laser light
Wavelengths	415nm, 630nm, 850nm, and 1072nm
Total Light Elements	279
Treatment Modes	2 pre-set wavelength combinations
Mode 1	630nm + 850nm + 1072nm
Mode 2	415nm + 850nm + 1072nm
Session Length	Pre-set 10-minute sessions
Brightness Levels	50%, 75%, and 100%
Pulse Frequency	10Hz
Manufacturer-Listed Irradiance	35–45 mW/cm²
Battery Capacity	4000mAh rechargeable battery
Charging	USB charging
Operation	Cordless during use
Color	White
Regulatory Information	Manufacturer markets the device as FDA 510(k) cleared; see regulatory note below
Warranty	1-year limited manufacturer warranty

Irradiance and other technical specifications are based on information supplied by Nicebeam and may be updated without notice. Testing methodology and measurement conditions were not independently verified by Prime Regeneration.

FDA Regulatory Information

Nicebeam currently markets this face mask as FDA 510(k) cleared. FDA 510(k) clearance, when applicable to the exact device and intended use, means the FDA determined that the submitted device was substantially equivalent to a legally marketed predicate device for specified indications.

FDA clearance is not the same as FDA approval and does not mean that every skincare or marketing claim made for a product has been independently evaluated or authorized by the FDA.

Prime Regeneration relies on manufacturer-supplied regulatory information. Customers requiring confirmation of the exact FDA 510(k) number or cleared indications should contact Prime Regeneration before purchase so the applicable manufacturer documentation can be reviewed.

What’s Included

• 1 Nicebeam LED Red Light Therapy Face Mask
• 1 remote control
• 1 USB charging cable
• 1 travel storage bag
• 1 user manual

Skincare products, USB wall adapter, cosmetics, and other accessories shown in lifestyle imagery are not included unless expressly stated with the product configuration.

How to Use the Nicebeam Face Mask

1. Charge before first use: Fully charge the built-in battery with the supplied USB cable.
2. Cleanse your face: Remove makeup, sunscreen, skincare products, and oils, then pat the skin dry.
3. Remove contact lenses: Contact lenses should be removed before a facial light session.
4. Position the mask: Place the mask over the face and adjust the straps until it sits securely without excessive pressure.
5. Choose a mode: Select the desired wavelength combination using the included controls.
6. Select brightness: New users may wish to begin at 50% before gradually increasing intensity if comfortable.
7. Select pulse if desired: Activate the optional 10Hz pulse setting according to the manufacturer’s instructions.
8. Close your eyes: Avoid looking directly into the LEDs or laser emitters during operation.
9. Relax for 10 minutes: The pre-set session will end automatically.
10. Remove and clean the mask: Wipe away any skin residue before storage.

Follow the user manual supplied with the device for the final recommended frequency and operating instructions.

Recommended Routine

Nicebeam recommends regular sessions, with its current instructions referencing daily use or approximately three to five sessions per week depending on the selected routine.

More frequent, longer, or higher-intensity sessions are not necessarily better. The mask uses a pre-set 10-minute cycle, and users should not repeatedly restart sessions in an attempt to accelerate cosmetic results.

Visible cosmetic changes generally develop gradually. Individual experiences vary according to age, skin condition, consistency of use, skincare routine, sun exposure, medications, genetics, hormones, and other personal factors.

Using the Mask on Different Skin Tones

Skin tone and melanin content can affect the way skin responds to visible-light wavelengths. Prime Regeneration does not represent that every operating mode is automatically appropriate for every skin tone or skin condition.

Users with deeper or melanin-rich skin tones, melasma, post-inflammatory hyperpigmentation, a history of pigmentation changes, or sensitivity to blue light should consider consulting a dermatologist before using the 415nm blue-light mode.

If you are uncertain about which wavelength combination is appropriate for your skin, begin with professional guidance rather than assuming that every mode should be used.

Skincare Before and After a Session

Before Use

• Cleanse the face thoroughly.
• Remove makeup and sunscreen.
• Remove contact lenses.
• Dry the skin completely.
• Avoid applying products known to increase photosensitivity.

After Use

After removing and cleaning the mask, you may continue with your normal skincare routine when compatible with the manufacturer’s instructions and your skin-care professional’s recommendations.

The product page suggests applying serum or moisturizer after a session. However, Prime Regeneration does not guarantee that light therapy increases skincare-product absorption or penetration.

Care and Maintenance

• Turn the mask off before cleaning.
• Disconnect the charging cable before cleaning or wearing the mask.
• Wipe the silicone surface gently with a soft, lightly dampened cloth.
• Remove makeup, oil, sweat, and skincare residue after each session.
• Do not immerse the mask, remote control, charging connection, or cable in water.
• Do not wash the mask in a washing machine or dishwasher.
• Avoid alcohol, bleach, abrasive pads, solvents, and harsh chemical cleaners unless expressly approved by the manufacturer.
• Allow the mask to dry completely before charging or storing.
• Do not sharply fold, crush, puncture, or place heavy objects on the mask.
• Protect the LEDs, laser emitters, wiring, and charging connection from impact.
• Store the mask in the included travel bag in a cool, clean, dry location.
• Do not use the device if the silicone, emitters, wiring, battery, controller, or charging port appears damaged.

Shipping & Delivery

Shipping Cost: Shipping is calculated at checkout based on the delivery location and available fulfillment method.

Order Processing: The supplier generally creates the shipping label within approximately two business days.

Transit Time: Transit begins after the package has been transferred to the carrier. Delivery timing may vary based on destination, product availability, carrier capacity, and other transportation conditions.

Tracking: Tracking information will be provided when it becomes available from the supplier or carrier.

Shipping-label creation does not necessarily mean the package has been picked up by the carrier. Additional time may pass between label creation, carrier acceptance, and the first tracking update.

Inspect the package and product promptly after delivery. Photograph the exterior packaging and contents if visible damage, missing components, or another shipping issue is discovered, and contact Prime Regeneration as soon as possible.

Warranty

The Nicebeam LED Red Light Therapy Face Mask includes a 1-year limited manufacturer warranty covering eligible defects in materials and workmanship. Warranty coverage is subject to the manufacturer’s complete terms, limitations, exclusions, and claim requirements.

Warranty coverage may not apply to normal wear, cosmetic damage, damaged silicone, improper folding, water exposure, improper charging, accidental damage, unauthorized modifications, battery damage, or failure to follow the operating and care instructions.

Prime Regeneration provides U.S.-based customer support to assist with order questions, delivery updates, and available manufacturer warranty guidance.

Returns, Cancellations & Refunds

30-Day Return Window

Eligible return requests may be submitted within 30 days. Return authorization is required before sending the product back.

• No return-label fee on approved eligible returns
• No restocking fee on approved eligible returns
• The product must meet the supplier’s return eligibility and hygiene requirements
• All original packaging, remote control, charging cable, travel bag, manual, and components must be retained
• Unauthorized returns may be refused

Because this is a facial personal-care device, opened or used products may be subject to additional hygiene-related return restrictions. Used, altered, damaged, incomplete, contaminated, improperly packaged, or unauthorized returns may not qualify for a refund.

Cancellations

Cancellation requests are reviewed manually. Cancellation is not guaranteed after the supplier has accepted, processed, prepared, or shipped the order.

Refunds

Approved customer refunds are processed after the supplier issues the corresponding refund to Prime Regeneration. Additional processing time may be required before the refund appears through the customer’s bank, card issuer, or payment provider.

Frequently Asked Questions

What wavelengths does the Nicebeam Face Mask use?

The mask uses four manufacturer-listed wavelengths: 415nm blue light, 630nm red light, 850nm near-infrared light, and 1072nm laser light.

How many LEDs does the mask have?

Nicebeam lists 279 total light elements across the mask. 

Does the mask use both LED and laser technology?

Yes. Nicebeam describes the mask as combining LED light with a manufacturer-listed 1072nm laser wavelength.

What are the two treatment modes?

One mode combines 630nm, 850nm, and 1072nm wavelengths. The second combines 415nm, 850nm, and 1072nm wavelengths.

How long does each session last?

Each session is pre-set to approximately 10 minutes and ends automatically.

Can I adjust the brightness?

Yes. The mask offers three brightness levels: 50%, 75%, and 100%.

What is the 10Hz pulse setting?

The mask includes an optional pulsed-light mode operating at a manufacturer-listed 10Hz frequency. Follow the user manual when selecting pulsed operation.

Is the mask cordless?

Yes. A built-in 4000mAh rechargeable battery allows cordless operation after charging.

Do I need to remain plugged into the wall?

No. Charge the battery before use, disconnect the charging cable, and then complete the session cordlessly.

Can I use the mask while it is charging?

No. Charge the device first and disconnect the charging cable before placing the mask on your face.

Does the mask reduce wrinkles?

The red and near-infrared mode may be incorporated into a cosmetic routine focused on smoother and firmer-looking skin. No reduction in wrinkles or fine lines is guaranteed.

Does the blue-light mode help with blemishes?

Nicebeam markets a blue-light combination as a cosmetic option for blemish-prone skin. Prime Regeneration does not represent the mask as a replacement for professional skin evaluation or treatment.

Can it help with dark spots or hyperpigmentation?

No improvement in pigmentation is guaranteed. Because visible blue light may not be appropriate for everyone with hyperpigmentation or melasma, consult a dermatologist before using that mode if pigmentation is a primary concern.

Can people with darker skin tones use the mask?

Suitability depends on the individual, selected wavelength, and skin history. Users with melanin-rich skin, melasma, or a tendency toward post-inflammatory hyperpigmentation should consider professional guidance before using the 415nm blue-light setting.

Do I need to remove my contact lenses?

Yes. Remove contact lenses before each facial light session.

Should I keep my eyes closed?

Yes. Keep your eyes closed during operation and do not stare directly into the LEDs or laser emitters.

Can I use retinol with the mask?

Some retinoids, acids, medications, and skincare products may increase skin sensitivity. Follow the manufacturer’s instructions and consult your dermatologist if you use prescription retinoids or other photosensitizing products.

Can I use the mask after a facial, chemical peel, laser procedure, or injection?

Consult the professional who performed the procedure before resuming use. NiceBeam advises against use over recently treated or healing skin.

Is the Nicebeam mask FDA 510(k) cleared?

Nicebeam currently markets the device as FDA 510(k) cleared. Prime Regeneration relies on manufacturer-supplied regulatory information. Customers who require confirmation of the exact 510(k) number and cleared indications should contact Prime Regeneration before purchase.

Is FDA clearance the same as FDA approval?

No. FDA 510(k) clearance and FDA approval are different regulatory pathways. A cleared device has been found substantially equivalent to an appropriate legally marketed predicate device for its specified indications.

Is the mask waterproof?

No. Do not immerse it in water or use it in a bath, shower, sauna, steam room, or another wet or high-humidity environment.

Is shipping included?

No. Shipping is calculated at checkout based on the delivery destination and available fulfillment method.

Important Skincare and Safety Information

This product is intended for cosmetic skincare and personal-use routines. It is not intended to diagnose, treat, cure, or prevent any disease or medical condition. Information on this page is not medical advice.

Individual results vary. No specific cosmetic outcome is guaranteed.

Consult a qualified dermatologist or healthcare professional before use if you are pregnant, have a medical or eye condition, have a history of seizures or light-triggered reactions, have melasma or significant hyperpigmentation, use an implanted electronic device, have reduced skin sensitivity, or take medication that may increase sensitivity to light.

Do not use the mask over open wounds, active skin infections, unexplained lesions, severe irritation, sunburn, or recently treated skin unless a qualified healthcare professional has confirmed that use is appropriate.

Remove contact lenses before each session. Keep your eyes closed and do not look directly into the LED or laser emitters.

Stop use immediately if you experience eye pain, vision changes, flashing lights, significant headache, dizziness, burning, blistering, unusual pigmentation changes, prolonged redness, swelling, or another unexpected reaction.

Always read and follow the manufacturer’s complete operating instructions, contraindications, charging directions, laser and eye-safety information, and regulatory labeling before use.